ASIANOL METAL CUTTING OILS
ASIANOL KUTKOOL OILS
Emulsifiable cutting oil forms milky emulsion having superior lubrication & cooling properties in metal cutting, contains antirust, anticorrosion additives. Fortified with biocide. Meets the requirements of IS: 1115-91. Recommended for use as general purpose metal cutting fluid.
| Grade |
Kinematic Viscosity cSt
at 40°C |
Flash Point
PMCC °C |
Water Content,
% by mass Max. |
| Kutkool A |
20 |
150 |
10.0 |
| Kutkool B |
20 |
150 |
10.0 |
|
|
| |
ASIANOL SULCRON C OILS |
Neat cutting oil containing chlorine & sulphurised fat as EP agent in cutting operation. Meets requirements of IS: 3065-85. Recommended for metal cutting operations with moderate to high load, with high feed rate and low speed. Suitable for gear cutting, drilling and also for non-ferrous metals. |
| |
| Grade |
Kinematic Viscosity
cSt at40°C |
Flash Point
COC°C |
Ash Percent |
Copper Strip Corrosion for 3 hrs at 100°C |
| Sulcron C |
26 - 40 |
170 |
0.05 |
Not worse than no.2 |
Sulcron C
IS 3065-1985TYPE 2, GRADE-II |
15 - 25 |
150 |
0.05 |
Not worse than no.2 |
Sulcron C
(SPECIAL) |
12 - 23 |
170 |
0.05 |
Not worse than no.2 |
|
|
| |
ASIANOL SULTREX OIL |
Neat cutting oil containing chlorine & sulphurised fat as EP agent in cutting operation. Meets requirements of IS: 3065-85. Recommended for metal cutting operations with moderate to high load, with high feed rate and low speed. Suitable for gear cutting, drilling and also for non-ferrous metals. |
| |
| Grade |
Kinematic Viscosity
cSt at40°C |
Flash Point
PMCC °C |
Sap. Value |
Reactive
Sulphur |
| Sultrex 85 |
26 - 40 |
160 |
10.0 |
0.5 |
|
|
|
ASIANOL QUENCHOL OILS |
General Purpose quenching oil produced from high viscosity index lub base oil with high oxidation stability, low volatility and high thermal stability. Recommended for general purpose quenching operation for heat treatment of metallic parts. |
| |
| Grade |
Kinematic Viscosity
cSt at40°C |
Flash Point,
°C, Min. |
Pour Point |
| Quenchol 22 |
19.8 - 24.2 |
195 |
0 |
| Quenchol 32 |
28.8 - 35.2 |
200 |
3 |
|
|
| |
ASIANOL MAXCOAT COMPOUNDS |
Bituminous heavy lubricants blended with tackiness additives. Meets requirements of IS: 9554-80. Recommended for lubrication of heavily loaded open gears, wire ropes, chain drives, tyres of cement plant kilns. |
| |
| Grade |
Kinematic Viscosity
cSt at 100°C |
Flash Point
°C Min. |
Water Content,
% by Mass Max. |
| Maxcoat 110 |
80 - 130 |
230 |
1.0 |
| Maxcoat 120 |
200 - 300 |
230 |
1.0 |
| Maxcoat 140 |
450 - 650 |
230 |
1.0 |
| Maxcoat 190 |
950 - 1200 |
230 |
1.0 |
|
|
| |
|
;