Asianol Lubricants for Manufacturing

Grades: 220 280 320

Heavy lube oil with good oxidation stability and tackiness properties. Recommended for lubrication of heavily loaded plain bearings of metal & non metal in steel mills , axle boxes & rolling stock of railways.

Category: Axle Oils
Consistency:
1 1.5 2

Calsoflex series of greases are recommended for any application where good lubricity, mechanical and thermal stability and rust protection are required.

Consistency:
0 1 2

These are Calcium base EP greases with extreme pressure and antirust properties. These greases show high water resistant properties. These greases meet requirements of IS 11637-86 and IPSS : 1-09-009.

Category: CALCIUM
Consistency: 1 M

This is specially developed for IISCO Burnpur for their rolling mill gear boxes, which work under rough conditions of vibrations, water ingress, high environmental temperature and with non metallic bearings.

Category: CALCIUM+ MOLY

This is a Calcium base grease with moderate EP properties and water resistance characteristics. This grease is recommended  for general purpose lubrication of  chassis greasing points, springs, suspension of automobiles.

Category: CALCIUM
Viscosity:
68 100 150 220 320

Specially blended compressor Lubricants for Reciprocating and Rotary compressor, thermally sable to air temp up to 200 Deg C available in Viscosity grades ISO VG 32 up to 320.

Category: Mineral
Viscosity: 100 220

It is a specially blended compounded compressor oil for Reciprocating and Rotary compressor, thermally sable to air temp up to 200 Deg C available in Viscosity grades ISO VG 32 up to 320.

Category: Mineral
Viscosity: 32 46 68

Specially blended compressor Lubricants for Reciprocating and Rotary compressor, thermally sable to air temp up to 200 Deg C available in Viscosity grades ISO VG 32 up to 320.

Category: Synthetic
Viscosity: 90 140

ASIANOL GEAROL AG oils are hypoid gear oils and are mainly used for automobiles like cars, buses, trucks and heavy earth moving machinery gear boxes and differential gear boxes.

Category: GL4
Viscosity:
68 100 150 220 320 460

These are extreme pressure type Industrial Gear Oils, which contain sulphur phosphorous EP additive. These oils have high thermal stability and oxidation stability.

Page 1 of 3