Error
  • JLIB_APPLICATION_ERROR_COMPONENT_NOT_LOADING
  • JLIB_APPLICATION_ERROR_COMPONENT_NOT_LOADING
  • JLIB_APPLICATION_ERROR_COMPONENT_NOT_LOADING
  • JLIB_APPLICATION_ERROR_COMPONENT_NOT_LOADING
  • JLIB_APPLICATION_ERROR_COMPONENT_NOT_LOADING
  • Error loading component: com_k2, 1
  • Error loading component: com_k2, 1
  • Error loading component: com_k2, 1
Consistency:
1 1.5 2

Calsoflex series of greases are recommended for any application where good lubricity, mechanical and thermal stability and rust protection are required.

Viscosity: 32 46 68

Specially blended compressor Lubricants for Reciprocating and Rotary compressor, thermally sable to air temp up to 200 Deg C available in Viscosity grades ISO VG 32 up to 320.

Category: Synthetic
Viscosity: 100 220

It is a specially blended compounded compressor oil for Reciprocating and Rotary compressor, thermally sable to air temp up to 200 Deg C available in Viscosity grades ISO VG 32 up to 320.

Category: Mineral
Viscosity:
68 100 150 220 320

Specially blended compressor Lubricants for Reciprocating and Rotary compressor, thermally sable to air temp up to 200 Deg C available in Viscosity grades ISO VG 32 up to 320.

Category: Mineral
Grades:
110 120 140 170 190

This is a bituminous lubricant compound suitable for heavily loaded open gears, wire ropes, chain drives. These are also recommended for tyres and open gears of cement and refractory industries working at high temperature. These compounds meet IS 9554 - 1980 specifications.

Category: BITUMINOUS/WAX
Consistency: 250

ASIANOL HYTEM 250 GREASE is non-soap clay base grease, has homogeneous and smooth structure. It contains Molybdenum disulphide in very low micron size and is in finely dispersed form.

Category: INORGANIC
Consistency:
0 1 2 3 4

These are Calcium base grease with graphite as filler made in low viscosity index lube base oils. This meets the requirements of IS : 508-1997.

Category: CALCIUM+GRAPHITE

This is a Sodium base grease with excellent roll stability and long life. This grease meets the requirements of IS : 10647-93. This is recommended for use in wheel bearings of automobiles, universal joints, axle journal boxes etc., which are not exposed to water.

Category: SODIUM
Consistency: 1 M

This is specially developed for IISCO Burnpur for their rolling mill gear boxes, which work under rough conditions of vibrations, water ingress, high environmental temperature and with non metallic bearings.

Category: CALCIUM+ MOLY
Consistency:
0 1 2

These are Calcium base EP greases with extreme pressure and antirust properties. These greases show high water resistant properties. These greases meet requirements of IS 11637-86 and IPSS : 1-09-009.

Category: CALCIUM
Page 1 of 3