LUBRICAST 840 D |
47% solids, semi-synthetic with three different high performance polymers that range from 200°F to 800°F. Formulated for aluminum, magnesium or zinc. Recommend ratios from 30:1 to 200:1. |
|
LUBRICAST 820 D |
21% solids, semi-synthetic with three different high performance polymers that range from 200°F to 800°F. Formulated for aluminum, magnesium or zinc. Recommended ratios from 20:1 to 100:1. |
|
|
LUBRICAST 898 NS |
is a high performance non-silicone die release agent. It is formulated for the aluminum and zinc die caster with complex or detailed molds. LUBRICAST 898NS forms a micro-stable solution in both hard and soft water and may be used in fully automatic spray systems or hand-held units. LUBRICAST 898NS is extremely resistant to rancidity and can be diluted up to 20:1 to 100:1 with water. This new Chemtool technology has had an extremely successful history of producing high volume castings weighing over 50 pounds. |
|
LUBRICAST HI TEMP |
50% solids high performance fully synthetic die release agent. Lubricast Hi Temp is formulated primarily for Harley Davidson specifications for the aluminum, magnesium, or zinc die caster with large and small complex molds. Lubricast Hi Temp forms a micro-stable emulsion in both hard and soft water. Recommend ratios from 20:1 to 400:1 used as a die release. Cast parts can be painted or plated without concern for lack of adhesion. |
|
| START-UP/SOLDER REMOVAL |
LUBRICAST HI TEMP |
Can also be used as a high performance start-up release by applying a thin coat with a pump spray bottle. When using the Lubricast Hi Temp as a start-up release it is recommended to be used in neat form or 1:1 ratio. Lubricast Hi Temp can also be used as an anti-solder removal spray easily applied by pump spray bottle directly to the solder area in net form. |
|
DIKOTE 1212 |
Dikote 1212 also known as anti-solder paste , is also a complex blend of organic waxes and high temperature lubricity additives. Dikote 1212 is primarily used in the event that excessive solder build-up occurs on the casting mold and can also be used as a start-up aid. Dikote 1212 is a thick paste that can be applied by a stiff bristle brush. |
|
;