ASIANOL INDUSTRIAL LUBRICATING OILS
ASIANOL HYDOL RO OILS |
Rust and oxidation inhibited hydraulic system & circulating oils. It has R&O additive and anti foam agents. Meets requirements of IS: 3098-93 and IPSS: 1-09-002. These oils are used for low and medium pressure hydraulic systems, circulatory systems of gear boxes and bearings in industrial applications. |
| |
| Grade |
Kinematic Viscosity
cSt at 40°C |
Viscosity
Index Min |
Flash Point
°C Min. |
Pour Point
°C Max. |
| Hydol RO 15 |
13.5 - 16.5 |
90 |
150 |
-3 |
| Hydol RO 22 |
19.8 - 24.2 |
90 |
160 |
-3 |
| Hydol RO 32 |
28.8 - 35.2 |
90 |
180 |
-3 |
| Hydol RO 46 |
41.4 - 50.6 |
90 |
180 |
-3 |
| Hydol RO 68 |
61.2 - 74.8 |
90 |
210 |
0 |
| Hydol RO 100 |
90 - 110 |
90 |
210 |
0 |
| Hydol RO 150 |
135 - 165 |
90 |
230 |
0 |
| Hydol RO 220 |
198 - 242 |
90 |
230 |
0 |
|
|
ASIANOL HYDOL AW OILS |
Antiwear type of hydraulic system oils with excellent oxidation & foam stability. Meets the requirements of IS: 10522-93 and IPSS: 1-09-022. Recommended for use in medium and high pressure hydraulic systems in industrial applications. This is also recommended for gear box and bearing lubrication circulatory system on high load conditions. |
| |
| Grade |
Kinematic Viscosity
cSt at 40°C |
Visco-sity
Index |
Flash Point
°C Min. |
Pour Point
°C Max. |
Pump-wear
Max. Vickers
104C pump |
| Hydol AW 32 |
28.2 - 35.2 |
90 |
180 |
-3 |
100 |
| Hydol AW 46 |
41.4 - 50.6 |
90 |
180 |
-3 |
100 |
| Hydol AW 68 |
61.2 - 74.8 |
90 |
210 |
0 |
100 |
| Hydol AW 100 |
90 - 110 |
90 |
210 |
0 |
100 |
| Hydol AW 150 |
135 - 165 |
90 |
230 |
0 |
100 |
| Hydol AW 220 |
198 - 242 |
90 |
230 |
0 |
100 |
| Hydol AW 257 |
231.3 - 282.7 |
90 |
230 |
0 |
100 |
| Hydol AW 320 |
288 - 352 |
90 |
230 |
0 |
100 |
|
|
ASIANOL HYDOL HLP OILS |
Antiwear hydraulic oils requiring superclean hydraulic fluids. Meets requirements of IS:10522-93, IS:11656-86 and DIN: 51524. Recommended for applications in hydraulic systems of industrial & mining sectors, where superclean fluids are required as hydraulic medium. |
| |
| Grade |
Kinematic Viscosity
cSt at 40°C |
Viscosity Index |
Flash Point °C Min. |
Pour Point
°C Max. |
Pump-wear Max. Vickers 104C pump |
| Hydol HLP 32 |
28.8 - 35.2 |
95 |
180 |
-3 |
50 |
| Hydol HLP 46 |
41.4 - 50.6 |
95 |
180 |
-3 |
50 |
| Hydol HLP 68 |
61.2 - 74.8 |
95 |
210 |
0 |
50 |
| Hydol HLP 100 |
90 - 110 |
95 |
210 |
0 |
50 |
|
|
ASIANOL SPINOL OILS |
Blended from highly refined low viscosity base oils with good oxidation stability. They are fortified with antiwear, antirust and antifoam additives. Meets requirements of IS: 493 (Part II). Recommended for lubrication of textile spindles, machine tools, hydraulic systems of machine tools, bearings. |
| |
| Grade |
Kinematic Viscosity cSt
at 40°C |
Flash Point
°C Min. |
Pour Point
°C Max. |
| Spinol 5 |
4.14 - 5.06 |
70 |
0 |
| Spinol 12 |
9 - 13 |
144 |
0 |
| Spinol 22 |
19.8 - 24.2 |
180 |
0 |
|
|
ASIANOL MACHINOL OILS |
General purpose machinery oils fortified with oiliness; film strength and antirust additives. Meets the requirements of IS: 493 (Part I). Recommended for use in machine tools for lubrication of bearings, various parts of machine tools, hydraulic systems of machine tools, lightly loaded open gears. |
| |
| Grade |
Kinematic Viscosity cSt
at 40°C |
Flash Point
°C Min. |
Pour Point
°C Max. |
| Machinol 32 |
28.8 - 35.2 |
150 |
0 |
| Machinol 46 |
41.4 - 50.6 |
160 |
0 |
| Machinol 68 |
61.2 - 74.8 |
160 |
0 |
| Machinol 100 |
90 - 110 |
170 |
0 |
| Machinol 150 |
135 - 165 |
170 |
0 |
| Machinol 220 |
198 - 242 |
200 |
0 |
| Machinol 320 |
288 - 352 |
200 |
0 |
| Machinol 460 |
414 - 506 |
240 |
0 |
|
|
ASIANOL GEAROL SP OILS |
Extreme pressure industrial gear oils fortified with sulphur phosphorous type EP additives. Meets the requirements of IS: 8406-93 and IPSS: 1-09-003. Recommended for use in heavily loaded industrial gear boxes and their bearings for splash type or circulatory lubrication systems. They are also used for lubrication of plain & roller bearings, chain drives, open gears, gear couplings carrying high loads. |
| |
| Grade |
Kinematic Viscosity
cSt at 40°C |
Flash Point
°C Min. |
Pour Point
°C Max. |
Timken OK
Load Kg. Min |
| Gearol SP 68 |
61.2 - 74.8 |
200 |
-6 |
25 |
| Gearol SP 100 |
90 - 110 |
200 |
-6 |
25 |
| Gearol SP 150 |
135 - 165 |
200 |
-6 |
27 |
| Gearol SP 220 |
198 - 242 |
220 |
-3 |
27 |
| Gearol SP 320 |
288 - 352 |
220 |
-3 |
27 |
| Gearol SP 460 |
414 - 506 |
230 |
0 |
27 |
|
|
ASIANOL FILMOL OILS |
Solvent refined high viscosity index straight mineral oils with high demulsibility, oxidation & thermal stability. Meets the requirements of IS: 6552-87 and IPSS: 1-09-001. Recommended for use in oil film bearings of rolling mills back up and work roll bearings in steel plants, where high water ingress is a possibility. Also suitable for circulatory system in light to medium loaded bearings and gear applications in steel and other heavy industries. |
| |
| Grade |
Kinematic Viscosity
cSt at 40°C |
Viscosity
Index Min |
Flash Point
°C Min. |
Pour Point
°C Max. |
Demulsibility
40-37-3 (Minute) |
| Filmol 32 |
30.4 - 33.6 |
90 |
190 |
-6 |
10 |
| Filmol 46 |
43.7 - 48.3 |
90 |
190 |
-6 |
10 |
| Filmol 68 |
64.6 - 71.4 |
90 |
190 |
-6 |
10 |
| Filmol 100 |
95 - 105 |
90 |
210 |
-6 |
20 |
| Filmol 150 |
142.5 - 157.5 |
90 |
210 |
-6 |
20 |
| Filmol 220 |
209 - 231 |
90 |
220 |
-6 |
20 |
| Filmol 320 |
304 - 336 |
90 |
220 |
-6 |
20 |
| Filmol 460 |
437 - 483 |
90 |
250 |
-6 |
40 |
|
|
ASIANOL COMPOL OILS |
Specially blended lubricating oils fortified with anti rust, anti oxidant and polymeric additive for piston cylinder lubrication. They are thermally stable to a high air temperature upto 200°C. Recommended for use in reciprocating and rotary compressors for piston cylinder lubrication and rotor-blade lubrication. |
| |
| Grade |
Kinematic Viscosity
cSt at 40°C |
Viscosity
Index Min |
Flash Point
°C Min. |
Pour Point
°C Max. |
CCR %
by Wt. |
| Compol 32 |
29 - 35 |
95 |
190 |
-3 |
0.05 |
| Compol 46 |
42 - 50 |
95 |
200 |
-3 |
0.05 |
| Compol 68 |
62 - 74 |
95 |
204 |
-3 |
0.05 |
| Compol 100 |
90 - 110 |
95 |
210 |
-3 |
0.05 |
| Compol 150 |
135 - 160 |
95 |
220 |
0 |
0.15 |
| Compol 220 |
200 - 240 |
95 |
230 |
0 |
0.15 |
| Compol 320 |
290 - 350 |
95 |
250 |
0 |
0.20 |
|
|
ASIANOL COMPOL C OILS |
Compounded compressor lub oil, with excellent resistance to water washing. They are fluid at low temperature, have good antirust & anticorrosion properties. Recommended for use in single & multistage air compressors handling moist air. It is not recommended as crankcase oil. |
| |
| Grade |
Kinematic Viscosity
cSt at 40°C |
Flash Point
°C Min. |
Pour Point
°C Max. |
Sap. Value |
| Compol C 100 |
95 - 105 |
192 |
-3 |
2.5 - 5.0 |
| Compol C 220 |
230 - 240 |
222 |
-3 |
2.5 - 5.0 |
|
|
ASIANOL LUBOL OILS |
Non detergent type lub oil fortified with antiwear, anti oxidant and corrosion inhibitor additives. Recommended for stationary, low duty, low r.p.m. diesel engines crankcase for lubrication of crankshaft bearings & piston - cylinders of pump sets and other such applications. |
| |
| Grade |
Kinematic Viscosity
cSt at 40°C |
Viscosity
Index |
Flash Point
°C Min. |
Pour Point
°C Max. |
| Lubol 68 |
64 - 72 |
90 |
210 |
-6 |
| Lubol 100 |
95 - 105 |
90 |
215 |
-6 |
| Lubol 150 |
145 - 155 |
90 |
225 |
-3 |
| Lubol 220 |
210 - 230 |
90 |
230 |
-3 |
|
|
ASIANOL WAYOL OILS |
Highly clean lub oil fortified with antifoam, antirust and mild EP additives and has excellent stick & slip ability. Recommended for lubrication of machine tools slide ways, small gear trains of machine tools and related parts. |
| |
| Grade |
Kinematic Viscosity
cSt at 40°C |
Viscosity
Index |
Flash Point
°C Min. |
| Wayol 32 |
29 - 33 |
90 |
160 |
| Wayol 68 |
64 - 72 |
90 |
170 |
| Wayol 150 |
135 - 160 |
90 |
180 |
| Wayol 220 |
210 - 230 |
90 |
190 |
|
|
ASIANOL WAYOL H OILS |
Highly clean lub oil fortified with antiwear, anti rust additives and has excellent oiliness and shock carrying ability. Recommended for dual use in machine tools for their slide ways, small gear trains and also for their low pressure hydraulic systems. |
| |
| Grade |
Kinematic Viscosity
cSt at 40°C |
Viscosity
Index |
Flash Point
°C Min. |
| Wayol H 32 |
29 - 33 |
90 |
190 |
| Wayol H 57 |
54 - 60 |
90 |
190 |
| Wayol H 68 |
64 - 72 |
90 |
200 |
| Wayol H 100 |
95 - 105 |
90 |
200 |
|
|
ASIANOL NUMATOL OILS |
Highly refined lub oil with antiwear, tackiness and EP additives. This oil forms a tacky oil film with hot compressed air. Recommended for lubrication in rock drills, pneumatic hammers and tools driven by compressed air. |
| |
| Grade |
Kinematic Viscosity
cSt at 40°C |
Flash Point
°C Min. |
Pour Point
°C Max. |
| Numatol 100 |
95 - 105 |
190 |
-6 |
| Numatol 181 |
175 - 185 |
200 |
-3 |
|
|
ASIANOL AXELOL OILS |
Heavy lub oil with good oxidation stability and tackiness properties. Recommended for lubrication of heavily loaded plain bearings of metal & non metal in steel mills, axle boxes & rolling stock of railways.
| Grade |
Kinematic Viscosity
cSt at 60°C |
Viscosity
Index Min |
Flash Point
PMCC °C Min. |
Pour Point
°C Max. |
| Axelol 220 |
64 - 71 |
40 |
160 |
-3 |
| Axelol 280 |
76 - 86 |
40 |
160 |
-3 |
| Axelol 320 |
90 - 103 |
40 |
160 |
-3 |
|
|
;