Lithium base grease with superior oxidation stability, water resistance, Meets the requirement of IS: 12203-93. Recommended for use in automobileS, trucks, Cars,Jeeps etc.

Lithrex 2M is a Lithium base multipurpose grease mixed with finely dispersed molybdenum disulphide in very low micron size. It has long service life, can take shock loads and has excellent water resistance. Meets the requirement of IS: 12203-93. Recommended for use in automobile, heavy trucks, dumpers, heavy earthmoving equipment working under severe duty cycle and under muddy conditions.

Rust and oxidation inhibited hydraulic system & circulating oils. It has R&O additive and anti foam agents. Meets requirements of IS: 3098-93 and IPSS: 1-09-002. These oils are used for low and medium pressure hydraulic systems, circulatory systems of gear boxes and bearings in industrial applications.

Antiwear type of hydraulic system oils with excellent oxidation & foam stability. Meets the requirements of IS: 10522-93 and IPSS: 1-09-022. Recommended for use in medium and high pressure hydraulic systems in industrial applications. This is also recommended for gear box and bearing lubrication circulatory system on high load conditions.

Antiwear hydraulic oils requiring superclean hydraulic fluids. Meets requirements of IS:10522-93, IS:11656-86 and DIN: 51524. Recommended for applications in hydraulic systems of industrial & mining sectors, where superclean fluids are required as hydraulic medium.

Blended from highly refined low viscosity base oils with good oxidation stability. They are fortified with antiwear, antirust and antifoam additives. Meets requirements of IS: 493 (Part II). Recommended for lubrication of textile spindles, machine tools, hydraulic systems of machine tools, bearings.

General purpose machinery oils fortified with oiliness; film strength and antirust additives. Meets the requirements of IS: 493 (Part I). Recommended for use in machine tools for lubrication of bearings, various parts of machine tools, hydraulic systems of machine tools, lightly loaded open gears.

Extreme pressure industrial gear oils fortified with sulphur phosphorous type EP additives. Meets the requirements of IS: 8406-93 and IPSS: 1-09-003. Recommended for use in heavily loaded industrial gear boxes and their bearings for splash type or circulatory lubrication systems. They are also used for lubrication of plain & roller bearings, chain drives, open gears, gear couplings carrying high loads.

Solvent refined high viscosity index straight mineral oils with high demulsibility, oxidation & thermal stability. Meets the requirements of IS: 6552-87 and IPSS: 1-09-001. Recommended for use in oil film bearings of rolling mills back up and work roll bearings in steel plants, where high water ingress is a possibility. Also suitable for circulatory system in light to medium loaded bearings and gear applications in steel and other heavy industries.

Specially blended lubricating oils fortified with anti rust, anti oxidant and polymeric additive for piston cylinder lubrication. They are thermally stable to a high air temperature upto 200°C. Recommended for use in reciprocating and rotary compressors for piston cylinder lubrication and rotor-blade lubrication.

Compounded compressor lub oil, with excellent resistance to water washing. They are fluid at low temperature, have good antirust & anticorrosion properties. Recommended for use in single & multistage air compressors handling moist air. It is not recommended as crankcase oil.

Non detergent type lub oil fortified with antiwear, anti oxidant and corrosion inhibitor additives. Recommended for stationary, low duty, low r.p.m. diesel engines crankcase for lubrication of crankshaft bearings & piston - cylinders of pump sets and other such applications.

Highly clean lub oil fortified with antifoam, antirust and mild EP additives and has excellent stick & slip ability. Recommended for lubrication of machine tools slide ways, small gear trains of machine tools and related parts.

Highly clean lub oil fortified with antiwear, anti rust additives and has excellent oiliness and shock carrying ability. Recommended for dual use in machine tools for their slide ways, small gear trains and also for their low pressure hydraulic systems.

Highly refined lub oil with antiwear, tackiness and EP additives. This oil forms a tacky oil film with hot compressed air. Recommended for lubrication in rock drills, pneumatic hammers and tools driven by compressed air.

Heavy lub oil with good oxidation stability and tackiness properties. Recommended for lubrication of heavily loaded plain bearings of metal & non metal in steel mills, axle boxes & rolling stock of railways.